Both smart locks and digital locks have the benefit of convenience over traditional mechanical locks. Replacing your conventional lock with a smart or digital one will mean you won't need to carry a physical key everywhere you go. Smart locks however, work a little differently from digital ones, so which to get depends on your preference and needs. We put together a quick guide to help you understand the difference so you can better decide which to get for your home. Yes. We tend to use the terms smart locks and digital locks interchangeably, but there is a slight difference. For digital locks to work, they require a physical interaction or proximity with the lock. The type of physical interaction differs from brand to brand. Smart locks on the other hand are integrated with Wi-Fi, Bluetooth or other wireless mobile communication technologies so you can access the lock and change settings through an app on a smartphone. Without hesitation, I just want to get a digital lock. If you are shopping around for a digital lock, one of the first things to ask yourself is what sort of modes of access (method of entry) do you want. Depending on the brands, digital locks can have access modes through PIN codes (typing a PIN onto the keypad), security tokens (e.g. RFID card) or biometric means (fingerprint, bluetooth). You may find having a digital lock with biometric means more useful than a digital lock with just PIN code entry, especially if you live with seniors who tend to be more forgetful. Decide if you want to install the digital lock on your locker as the lock you buy will be different. It all sounds very complicated. So which should I get? If you just want the convenience of not having physical keys with you, a digital lock will suffice. Depending on the access modes and features available, you will be able to unlock your lock in a variety of ways and have useful features like helping you automatically lock your lockers when the door closes. Smart locks are a step-up from that and are for those who want to use their smartphone as a key. If you regularly have visitors or part-time cleaners coming by, a smart lock is useful to provide access to your home even when you are away. The access you provide (usually a PIN code or your guest can download the same app you use to gain access) is often one-time or only accessible at a designated time you set, so when they leave your home, they won't be able to use the same access again.

If you're installing an intelligent apartment parcel storage locker , you'll need to decide whether to use electric strike locks or magnetic locks on the doors. The right choice for your building depends on your needs and priorities. But what's the difference between these locks? The primary difference between electric strike locks (door strike) and magnetic locks (maglocks) is their power requirement. Maglocks are fail-safe, while electric strikes are generally fail-secure. In other words: Magnetic locks require power to lock the door, whereas electric locks require power to unlock the door. First, let's define some "jargon" related to locks. You'll often see the terms "fail-safe" and "fail-secure" when looking at different access control system. These are important terms to understand because they tell you how the lock will function in the event of a power failure: "Fail-Safe" requires power to lock the door. If power is lost, then the door will become unlocked. (Typically Mag Locks) "Fail-Secure" requires power to unlock the door. If power is lost, then the door will remain locked. (Typically Door Strikes) It's also important to have a basic understanding of the different parts and how they function together. Most door locks have three major components that work together to keep the door secure. They include the handle and the latch (the small metal bolt that sticks out of the side of the door when open), which together make up the lockset, and the strike. The strike, or "strike plate" is the metal plate or assembly installed on the inside of the door frame and is aligned to receive the latch and hold it secure. Electric Strike Locks or "Electric Strikes" Electric strikes are electromechanical door locking devices, meaning they are mechanical locks with electronic devices that provide additional functionality. Electric strikes are used in combination with another form of locking devices, such as a lock set or a panic bar. They are installed in place of the conventional lock strike plate on the inside of the door frame. Electrical power is supplied to the strike, which holds the latch or lock bolt in place, keeping the door locked until the release system is activated. The type of release system chosen will vary based on the application. Examples of release systems for electric strikes include reception release buttons, a keypad for entering passcodes, electronic key card or fob readers, etc. Once the release system is activated, a hinged piece of metal inside the electric strike will pivot to allow the door to open without having to turn the door handle. The lock or panic hardware functions independently of the electric strike. Therefore, while the electric strike plate functions to keep the door locked from the outside, even if the power is out, you can still open the door from the inside by turning the door handle or pushing the touchpad of the panic hardware. This is an example of a fail-safe function. However, depending on the application, most electric strikes can be set to either fail-safe or fail-secure using an integral switch. Electric strike lock works in combination with a mechanical locking mechanism by replacing the standard fixed strike of the lock with an electronically controlled strike. An access control device is used to trigger the strike plate and release the lock bolt or latch. Power fail modes: Can be fail-safe or fail-secure. Magnetic or "Mag" Locks Mag locks are electromagnetic door locking devices. A mag lock consists of a large electromagnet installed along the top of a door frame and a metal plate on the door that lines up with it. The lock functions by passing an electric current through the electromagnet, creating a magnetic charge that attracts the plate and holds it in place against the door frame. This keeps the door securely locked until the power is removed or interrupted. Examples of release systems for mag locks include many of the same devices as for electric strikes. When energized, a mag lock can create a retention force greater than 1,000 pounds, making it a very effective lock. That is, until the power is cut. Because mag locks by design require a constant supply of electricity to remain locked, mag locks are fail-safe only — they do not function to keep the door locked from either side when the power is out. Electromagnetic lock works independently of the mechanical door latch by means of an electric current passed through an electromagnet installed on the door frame creating a magnetic charge that bonds to a metal armature plate on the door. An access control device is used to cut power to the electromagnet to trigger the release of the lock. Power fail modes: Only available fail-safe.

One of the easiest upgrades to your smart home is replacing your front door's standard deadbolt with a new smart lock. Most smart locks are simple to install, and many allow remote monitoring. We'll show you how to install a new smart lock and get it working correctly. Why Should You Install a Smart Lock? The biggest benefit that a smart lock offers is convenience. Many smart locks can be opened via an app or with a numeric code instead of with keys. Some, like KR-D Panel, you can use RFID cards, passwords, and Bluetooth to unlock. Smart locks often offer upgraded security features like specially cut keys or specific access codes to help deter thieves. Ready to install your own smart cabinet door lock? Let's begin. What You'll Need Smart lock kit Screwdriver Smartphone Drill (optional) Note: The lock in the photos is the KR-D Panel. It comes as a kit with all the necessary hardware included. Most other smart locks are similar. Remove the Old Lock Before you install your new smart lock, you'll need to remove your old lock. Usually, this is held in via one or more screws. You'll find them on the inside of the door. Remove these screws from the lock, and the lock should separate into two halves leaving only the deadbolt. The deadbolt will then unscrew from the edge of the door. Once you remove the deadbolt screws, the entire assembly should slide right out. Install the New Deadbolt and Strike Plate The KERONG kit in our example comes with a new deadbolt, strike plate, and hardware. The next step is to install these new parts in place. Using your Philips screwdriver, install the screws for the new deadbolt into the top and bottom holes of the deadbolt mounting plate. Then install the strike plate. If you'd like to install longer screws for the strike plate, but the holes are too shallow, you'll need to drill out these holes a bit. Two small pilot holes should be good enough to keep the door jamb's wood from splitting and to allow the screws a little extra guidance as you drive them into the jamb. Once the strike plate and deadbolt are installed, close the door. Throw the deadbolt a few times to make sure it is correctly aligned. Make sure that the deadbolt extends all the way into the new strike plate. If the deadbolt stops before the lock is fully locked, then you'll need to drill out the receiving hole on the door frame that accepts the deadbolt. In the example above, the deadbolt cavity's edges needed to be adjusted with a wood file to accommodate the new deadbolt. Install the Front Half of the Lock The lock must be installed into the door, and the ribbon cable must be fed under the deadbolt. Because almost all smart locks come with two sides, the front side will need to be held in the lock opening so that it doesn't fall out while installing the rear mounting bracket. For this, you can use a strip of painter's tape. This tape is available at most big-box hardware stores. Gaffer's tape would work as well if you have that available. So would masking tape. The goal is to hold the lock face tight to the cabinet door without leaving any sticky adhesive residue. Tape over the front part of the lock and then close the door. Once the rear mounting bracket is in place, remove the tape. Install the Rear Mounting Bracket The rear mounting bracket should only be installed one way; otherwise, the lock will not slide into place. Measure your cabinet door thickness to determine which screws to use. If you are unsure or don't have a measuring device handy, try the shorter screws first. If they don't work, then you'll need to use the longer set. Then install the back half of the lock. Program the Lock Programming the KR-D Panel consists of downloading an app to your mobile device, registering an email address, sending a verification code, accessing the wireless network, and adding your device. This process will be similar to most other smart lock devices. It is recommended that you consult your smart lock manufacturer's official documentation to determine exactly how to pair your lock with your mobile device. Once you've got everything paired, then make sure to test the lock. Some, like the KERONG, have the ability to detect fingerprints in addition to the keypad and Wi-Fi functions. If you have a key code, make sure to write it down and keep it in a safe place until you commit it to memory. Now is also a good time to configure any additional users. Enjoy Your New Smart Lock Adding a smart lock to your home allows easier access for family members, visitors, and in-home professional services. With a smart lock, you'll gain the peace of mind that comes with knowing who is unlocking your lockers and when. By installing a smart cabinet door lock, you'll be investing in the safety and security of your smart home.

If you are not a professional technician or just a simple hobbyist for electronic products. You may come across some terms you don't really understand when browsing through the specifications of various electronic products. For example, check our product parameters will have this specification: IP65.Do you think of what he is specifically? If you don't understand, I'll go over the definitions in detail so you can match them up against our cabinet locks or other electronics. What is IP rating? It is a standard drafted by IEC to classify electrical appliances and other equipment according to their dustproof and waterproof characteristics.IP protection level is composed of two numbers, the first mark number indicates the level of the appliance against dust and foreign objects, and the second mark number indicates the degree of confinement of the appliance against moisture and water intrusion, the larger the The number means the higher the protection level 0 No protection 1 Protection against solid objects exceeding 50 mm (e.g., accidental touch by hand) 2 Protection against solid objects exceeding 12mm (e.g. fingers) 3 Protection against solid objects exceeding 2.5 mm (e.g. tools and wires) 4 Protection against solid objects exceeding 1mm (e.g. tools, wires, and thin wires) 5 Protection against dust - preventing entry (no harmful deposits) 6 Completely dust-proof The second number (Protection against liquids) 0 No protection 1 Protection against vertically falling water droplets 2 Protection against direct spray up to 15° vertically 3 Protection against direct spray up to 60o vertically 4 Preventing all-round spraying-allowing limited entry 5 Protects against low-pressure spraying if the water is coming from all directions - allows limited access 6 Prevents powerful spraying, e.g. for boat decks - allows limited access 7 Prevented from the temporary immersion of 15cm to 1m Test time 30 minutes 8 prevents prolonged immersion under pressure So we know the exact meaning based on the specific description. For example, our electronic locker locks are IP65 rated, which corresponds to Completely dust-proof Prevents powerful spraying. When it comes to light rain and dust, our smart electronic cabinet lock locks will give you peace of mind. Have you checked it yet?

First of all, I have to admit that there is a KERONG lock on this list. As a professional manufacturer of cabinet locks, this is why I share them. In regards to locker locks, we'll immediately think of large logistics lockers. After all, it's relevant to our lives. I am going to share just a few of the locks that are used on these types of lockers. You may not be happy with what I recommend, but you can check to get more. 1. KERONG Electric Solenoid lock Lock body material 430 stainless steel，tongue lock is zinc alloy. The lock switch uses Omron and has a working life of 500,000 cycles.The lock as a whole has been salt spray tested for 72 hours. With an industrial-grade quality guarantee. Because it is an electromagnetic control switch, there is a requirement for the weight(0.5KG~4KG) of the locker door. The disadvantage of the lock is that its state is a normally closed mode and its power consumption is high. It's a great choice if you're using it for schools, malls, and other such places. Of course, there's an even bigger advantage to choosing it, and that's the affordable price. 2. KERONG Electric Motor lock On the base model, we have replaced the locking casing with 304 stainless steel for increased thickness. It is motor driven for greater strength.Because of the addition of the PCB board, the lock can be made to open and close normally by signaling the lock. At the same time, we have added a waterproof function to some locks, and the waterproof reach IP65 level so that it can be used in more places. It's a great choice if you have a requirement for locker locks in terms of security and strength. And you use it for outdoor use again, it will be a perfect choice. Of course, the price will be a bit higher. If you have requirements for the price and want to get this effect, I recommend the following. The material of the lock body has been changed to 430 stainless steel. It doesn't seem as heavy, but the low consumption, high stability, and waterproofing are all the same. Most importantly, the price will be more attractive to you. Final Thoughts If you're still looking for the best locker locks, you definitely need to check out this article. This is the best locker lock we have. If you are currently looking for such a project, you can contact us. We can provide you with more solutions. If you want to know more details about the product, or industry information, you can follow me, I will continue to recommend more good products to you.